PnC Smart PDU
The PnC_Smart_PDU is a remote control switch for device operating at voltage 220VAC with max power 1320W. It provides a system solution for an Ethernet-enabled power plug that can turn on/off power from the main plugin two ways: using the android app with Wi-Fi connection, and webserver. This device includes three normal sockets, three C13 sockets, and one C14 socket using detect 220VAC voltage.
.png)
Figure1: HW block diagram
.png)
Figure 2: System block diagram
| Input | |
| Input voltage | 90-265 (V)AC |
| Frequency | 50/60 Hz |
| Input Plug | AS/NZS 3112 |
| Input Power Capacity | 13kW |
| (1) x IEC60320/C14 | Detect AC voltage: 90-265V |
| Output | |
| Conecctor | Rating |
| (3) x IEC60320/C13 | Output Voltage: 220V Maximum Load: 6A |
| (3) x US socket 3 pin | Output Voltage: 220V Maximum Load: 6A |
|
Communitcation - 10/100 Mbps Ethernet (RJ45 connector) - Support following Hardwared TCP/IP Protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE. - Support Power down mode - Support Wake on LAN over PDU - Support High Speed Serial Peripheral Interface - Support Auto Negotiation (full and half duplex, 10 and 100-based). |
|
|
Operation ambient - Operation temperature: -10 to 70°C - Operation humidity: 0 to 95% |
|
.png)
